ZYE MY150-S24S5 150W Dual-Output Power Supply – 24V 6A / 5V 1A

LASER PARTS | POWER SUPPLIES & ELECTRICAL

ZYE MY150-S24S5 150W Dual-Output Switching Power Supply

The ZYE MY150-S24S5 is a 150W switching power supply designed to provide both 24V DC and 5V DC power for compatible CO2 laser machines and industrial electronic equipment.

This dual-output power supply delivers up to 6A at 24V DC and up to 1A at 5V DC, allowing compatible machine components with different voltage requirements to receive power from one unit.

The power supply features a compact, ventilated metal housing, screw-terminal connections, and mounting tabs for installation inside compatible machine electrical cabinets.

Important: The two 24V terminals share one 6A output. They do not provide 6A independently. Verify the model number, electrical ratings, terminal layout, and mounting dimensions before ordering.

Key Features

• Dual DC Outputs: Provides 24V and 5V DC power from one supply.
• 150W Power Rating: Designed for compatible electrical loads within the rated output limits.
• 24V DC Output: Supplies up to 6A total through two convenient 24V connection terminals.
• 5V DC Output: Provides up to 1A for compatible low-voltage electronics.
• 110/220V AC Input: Supports the input voltage options marked on the unit.
• Screw-Terminal Connections: Provides accessible connections for AC input, protective ground, and DC outputs.
• Ventilated Metal Enclosure: Perforated housing allows airflow around internal components.
• Compact Construction: Designed for installation in compatible electrical cabinets.
• Mounting Tabs: Integrated metal mounting flanges provide mounting points.
• Replacement Component: Intended for equipment requiring the MY150-S24S5 or a verified electrical and mechanical equivalent.

Product Specifications

Manufacturer	ZYE
Model Number	MY150-S24S5
Product Type	Switching DC Power Supply
Rated Power	150W
Input Voltage	110V / 220V AC
Input Frequency	50/60Hz
Primary DC Output	24V DC, 6A Maximum
Secondary DC Output	5V DC, 1A Maximum
24V Output Terminals	2 Shared Connections
DC Ground Terminals	2 Marked GND
Terminal Count	8 Screw Terminals
Terminal Arrangement	AC, AC, FG, 24V, 24V, GND, GND, 5V
Approximate Dimensions	134 × 97 × 30mm (Existing Catalog Specification)
Enclosure	Ventilated Metal Housing
Mounting	Metal Mounting Flanges
Quantity Included	1 Power Supply
Rabbit Laser USA SKU	00073

Understanding the Dual DC Outputs

The MY150-S24S5 provides two different DC voltage levels for compatible electronic equipment.

24V DC Output: Rated for up to 6A total. Two terminals are provided for convenient connections, but both share the same 24V output capacity.

5V DC Output: Rated for up to 1A. This output can supply compatible electronics that require a regulated 5V DC source.

When both outputs are used, the connected equipment must remain within the individual current limits and the overall power supply rating.

Important: Do not connect an electrical component to a voltage output other than the one specified by its manufacturer. Supplying 24V to a component designed for 5V may cause permanent damage.

Terminal Connections

The product label identifies eight screw terminals arranged as follows:

AC / AC	AC Power Input
FG	Frame / Protective Ground
24V / 24V	Positive 24V DC Output Connections
GND / GND	DC Return Connections
5V	Positive 5V DC Output

Wiring Notice: Follow the terminal markings and equipment wiring diagram. FG and DC GND serve different purposes and must not be treated as interchangeable connections.

The input label lists 110V and 220V AC. Verify the required input-voltage configuration before connecting power. Do not assume the unit automatically selects the correct voltage.

Compatibility

This power supply is intended for compatible CO2 laser engraving and cutting machines or other electronic equipment requiring the same dual-output electrical configuration.

Before ordering, compare the replacement power supply with your existing unit:

• Manufacturer and MY150-S24S5 model number
• 110V / 220V AC input requirements
• 24V DC output rated at 6A
• 5V DC output rated at 1A
• Eight-terminal wiring arrangement
• Physical dimensions and available cabinet space
• Mounting-hole locations
• Required electrical connections and power capacity

Important: Similar-looking switching power supplies may have different output voltages, current capacities, terminal arrangements, or grounding requirements. Physical appearance alone does not confirm compatibility.

The MY150-S24S5 should only replace a power supply whose electrical and installation requirements have been verified.

Installation & Safety

• Disconnect the laser machine from its electrical supply before inspecting or replacing the power supply.
• Allow internal capacitors sufficient time to discharge according to the equipment manufacturer's instructions.
• Verify the required AC input voltage and any input-voltage selection before applying power.
• Connect the protective ground according to the manufacturer's wiring instructions.
• Verify all AC input, 24V, 5V, and GND connections before energizing the supply.
• Do not exceed the rated current of either DC output.
• Ensure the mounting hardware is secure and does not contact electrical components.
• Maintain adequate airflow around the ventilated housing.
• Keep wiring away from moving machine components and sharp metal edges.
• Do not operate the power supply with damaged wiring or loose terminals.
• Have installation and troubleshooting performed by a qualified person familiar with electrical control systems.

Safety Note: This power supply contains hazardous mains-voltage circuitry. Turning off the machine's control panel may not disconnect electrical power from the supply. Always follow proper electrical isolation and verification procedures before servicing.

If a replacement power supply fails, overheats, or produces incorrect output voltage, disconnect power and investigate the connected circuits before installing another unit.