Stepper Motor, 200 Steps/Rev, 57_76mm, 4.5V, 2 A/Phase

Stepper Motor, 200 Steps/Rev, 57_76mm, 4.5V, 2 A/Phase

High-torgue hybrid stepping motor has a 1.8 degree angle (200 steps/revolution. Each phase draws 2A at 4.5V, allowing for a holding torgue of 14kg-cm (190 oz-in).

Six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers.

Size: 56.4 mm square _ 76 mm, not including the shaft (NEMA 23)

Weight: 1 kg (35 oz)

Shaft diameter: 6.35 mm (0.25_) �D�

Steps per revolution: 200

Current rating: 2 A per coil

Voltage rating: 4.5 V

Resistance: 2.25 � per coil

Holding torque: 14 kg-cm (190 oz-in)

Inductance: 3.6 mH per coil

Lead length: 30 cm (12_)

Output shaft supported by two ball bearings