Inline Chiller Water Filter – 10mm Hose Connections

LASER PARTS | WATER COOLING & CHILLERS

Inline Chiller Water Filter – 10mm Hose Connections

This inline water filter is designed for compatible CO2 laser water-cooling systems using 10mm water-line connections. Installed in the cooling-water circuit, it helps capture debris and particles that could otherwise circulate through the chiller and laser tube cooling system.

The filter features a compact plastic housing with a translucent cap and two water-line connections. Its inline design allows it to be installed in a compatible water circulation line as a replacement for an existing filter assembly.

Keeping cooling water clean is an important part of maintaining proper circulation and reducing the buildup of debris in water-cooled laser equipment.

Key Features

• Inline Water Filtration: Helps capture particles and debris circulating through a compatible cooling-water system.
• 10mm Hose Connections: Nominal connection size for compatible laser cooling-water lines.
• Compact Design: Small filter assembly suitable for integration into compatible cooling circuits.
• Translucent Cap: Allows some visibility into the filter housing for visual inspection.
• Plastic Housing: Lightweight construction designed for water-circulation applications.
• Replacement Application: Suitable for replacing a matching inline water filter used in a compatible laser chiller or cooling system.

Product Specifications

Product Type	Inline Chiller Water Filter
Nominal Hose Connection	10mm
Connection Configuration	2 Water-Line Connections
Housing Material	Plastic
Housing Design	Compact Body with Translucent Cap
Filtration Application	Cooling-Water Debris and Particle Reduction
Installation Type	Inline Water Circuit
Application	Compatible CO2 Laser Chillers and Water-Cooling Systems
Quantity Included	1 Filter Assembly
Rabbit Laser USA SKU	251

Compatibility

This filter is intended for compatible laser water-cooling systems using nominal 10mm water-line connections. It may be used in suitable chiller installations or external cooling circuits where the connection dimensions and filtration requirements match.

Before ordering, compare the filter with your existing component, including:

• Water-line connection diameter
• Tubing dimensions and fitting style
• Filter housing dimensions
• Installation space and orientation
• Required water flow and operating pressure

Important: Confirm that the filter is suitable for your cooling system's flow requirements. A filter with incompatible connections or excessive flow resistance can interfere with proper coolant circulation.

Installation & Maintenance

• Turn off and disconnect the laser machine and cooling equipment before servicing.
• Drain or isolate the affected cooling-water line before removing the existing filter.
• Confirm that the replacement filter matches the tubing and connection requirements.
• Install the filter in the correct water-flow direction if indicated on the housing.
• Secure the water connections using suitable fittings or clamps.
• Refill the cooling circuit with water appropriate for the equipment manufacturer's requirements.
• Remove trapped air and verify proper coolant circulation.
• Inspect the filter and connections for leaks before operating the laser machine.
• Inspect the filter periodically and replace it when necessary to maintain proper water circulation.

Maintenance Note: A water filter helps capture suspended particles but does not disinfect cooling water or prevent bacterial growth by itself. Follow the chiller manufacturer's coolant maintenance and replacement recommendations.