FDPS 24W Switching Power Supply – 12V DC 2A, 110/220VAC

LASER PARTS | POWER SUPPLIES

FDPS 24W Switching Power Supply – 12V DC 2A

The FDPS 24W switching power supply provides regulated 12V DC power for compatible laser machine electronics, control circuits, and industrial equipment. It converts AC input power into a low-voltage DC output for components requiring a 12V electrical supply.

Rated at 24 watts, this compact power supply delivers up to 2 amps of current at 12V DC. Its perforated metal enclosure helps dissipate heat, while screw terminal connections provide convenient access for installation and replacement.

The power supply also features a fine voltage adjustment control and an LED output indicator, making it practical for maintaining compatible laser machine electrical systems.

Important: Verify the required output voltage, current rating, AC input configuration, and terminal connections before ordering. This is a 12V DC power supply and should not be substituted for a 5V or 24V model.

Key Features

• 12V DC Output: Provides regulated low-voltage power for compatible electrical components.
• 2A Rated Current: Supports connected devices requiring up to 2 amps within the supply's operating limits.
• 24W Power Rating: Compact power supply for compatible low-power applications.
• 110/220V AC Input: Designed for compatible AC input configurations.
• Fine Voltage Adjustment: Allows minor adjustments to the DC output voltage.
• LED Output Indicator: Provides a visual indication of power supply operation.
• Electrical Protection: Listed with overcurrent and overvoltage protection.
• Vented Metal Housing: Helps dissipate heat generated during operation.
• Screw Terminal Connections: Provides accessible AC input and DC output terminals.
• Compact Design: Suitable for installation inside compatible electrical cabinets.

Product Specifications

Product Type	AC-to-DC Switching Power Supply
Model	FDPS 24W
Rated Power	24W
AC Input	110/220V AC
DC Output Voltage	12V DC
Rated Output Current	2A
Output Configuration	Single DC Output
Voltage Adjustment	Fine Adjustment Control
Output Indicator	LED
Protection	Overcurrent and Overvoltage (per existing product specifications)
Connection Type	Screw Terminals
Terminal Markings	L, N, Ground, V-, V+
Enclosure	Perforated Metal Housing
Approximate Dimensions	3.375 × 2.375 × 1.3 inches
Application	Compatible Laser Machine and Industrial Control Electronics
Quantity Included	1 Power Supply
Rabbit Laser USA SKU	126

How This Power Supply Works

The FDPS 24W converts incoming AC electrical power into a regulated 12V DC output. This allows compatible electronic components to receive the low-voltage power they require for operation.

The output is rated at 2 amps, providing a maximum nominal output of 24 watts. The power supply must be matched to the connected equipment's voltage and current requirements.

A fine adjustment control allows the output voltage to be trimmed when required by the equipment manufacturer. This adjustment is not intended to convert the power supply into a different voltage model.

The LED indicator provides a convenient visual reference during inspection and troubleshooting. However, an illuminated LED does not confirm that the output voltage is correct or that the connected equipment is functioning properly.

Compatibility

This power supply is intended for compatible laser machines and electrical equipment requiring a regulated 12V DC output with a current demand within the supply's 2A rating.

Before ordering, compare the replacement power supply with your original component:

• 12V DC output requirement
• 2A rated current capacity
• 24W power rating
• 110/220V AC input requirements
• Input voltage selection or configuration
• AC input and DC output terminal arrangement
• Overall dimensions and mounting points
• Available ventilation clearance

Important: Switching power supplies may look nearly identical while providing different output voltages, current ratings, or input configurations. Matching the housing appearance alone does not guarantee compatibility.

Do not substitute this 12V DC model for a power supply requiring 5V, 24V, or multiple DC outputs.

Installation & Safety

• Disconnect the laser machine from electrical power before inspecting or replacing the power supply.
• Allow stored electrical energy to discharge according to the equipment manufacturer's instructions.
• Verify the input voltage configuration before applying power.
• Confirm the L, N, protective ground, V-, and V+ connections using the markings on the actual unit.
• Maintain correct DC output polarity when connecting equipment.
• Do not exceed the 2A rated output current.
• Do not adjust the output voltage beyond the requirements of the connected equipment.
• Maintain adequate ventilation around the metal enclosure.
• Secure the unit using the appropriate mounting points and hardware.
• Have installation and electrical troubleshooting performed by someone qualified to work with electrical control systems.

Safety Note: This power supply contains hazardous AC voltage circuitry. The vented enclosure does not make the internal electrical connections safe to touch. Capacitors may retain a charge after power is disconnected.

If a replacement power supply repeatedly fails, overheats, or produces an incorrect output voltage, investigate the connected wiring and electrical load before installing another replacement.