D-100B 100W Dual-Output Power Supply – 5V 6A / 24V 3A

LASER PARTS | POWER SUPPLIES

D-100B 100W Dual-Output Switching Power Supply – 5V 6A / 24V 3A

The D-100B is a dual-output AC-to-DC switching power supply designed to provide both 5V and 24V DC power for compatible laser machines, control systems, and industrial electronic equipment.

This power supply provides a 5V DC output rated at 6 amps and a separate 24V DC output rated at 3 amps. Both voltage outputs are available from one compact power supply, helping support equipment that requires different voltages for its electronic components.

The vented metal housing allows heat to dissipate, while the labeled screw terminals provide connections for AC input, protective earth, and DC output circuits.

Important: This is a dual-output power supply. Verify that your original component requires both 5V and 24V DC outputs before ordering.

Key Features

• Dual DC Outputs: Provides both 5V and 24V DC from a single power supply.
• 5V Output: Rated at up to 6 amps for compatible electronic circuits.
• 24V Output: Rated at up to 3 amps for compatible equipment and control components.
• 100W Power Class: Designed for compatible applications within the supply's combined output rating.
• AC Input: Supports compatible 110V and 220V-class AC electrical systems according to the unit's input configuration.
• Screw Terminal Connections: Provides labeled connections for input power, protective earth, and DC outputs.
• Vented Metal Housing: Allows airflow around the internal electronic components.
• Compact Design: Suitable for installation inside compatible laser machine electrical cabinets.
• Replacement Component: Intended for replacing an existing power supply with matching electrical specifications and connections.

Product Specifications

Product Type	Dual-Output AC-to-DC Switching Power Supply
Model	D-100B
Nominal Power Rating	100W
AC Input Voltage	100–120VAC / 200–240VAC
Input Frequency	50/60Hz
DC Output V1	+5V DC
V1 Rated Current	6A
DC Output V2	+24V DC
V2 Rated Current	3A
Output Configuration	Two DC Voltage Outputs
Connection Type	Screw Terminal Block
Ground Connection	Protective Earth / FG Terminal
Housing	Vented Metal Enclosure
Application	Compatible Laser Machine and Industrial Control Electronics
Quantity Included	1 Power Supply
Rabbit Laser USA SKU	127

Understanding the Dual Outputs

Many laser machines use different voltages for their control electronics and other electrical components. The D-100B provides two separate voltage outputs so compatible circuits can receive the power they require.

• 5V DC: Commonly used by compatible electronic logic circuits and control components.
• 24V DC: Commonly used by compatible control circuits, relays, sensors, and other machine components.

The output ratings describe the maximum current available from each voltage channel under its rated operating conditions. They do not mean that 5V and 24V devices can be connected interchangeably.

Important: The combined power draw must remain within the manufacturer's total output-power and load requirements. Do not assume both individual output-current limits can always be used simultaneously.

Compatibility

The D-100B is intended for compatible laser machines and electrical equipment requiring both 5V DC and 24V DC power from a single dual-output switching power supply.

Before ordering, compare the replacement with your existing component:

• D-100B model number
• AC input voltage and input-selection requirements
• 5V DC output rating
• 24V DC output rating
• Combined output-power requirements
• Input and output terminal arrangement
• Grounding connections
• Housing dimensions and mounting points
• Available ventilation and installation clearance

Important: Power supplies with similar metal enclosures may have different output voltages, current ratings, wiring arrangements, or electrical characteristics. Appearance alone does not confirm compatibility.

This power supply should only be installed in equipment whose voltage, current, grounding, and wiring requirements have been verified.

Installation & Safety

• Disconnect the laser machine from its electrical supply before inspecting or replacing the power supply.
• Verify the equipment is de-energized and allow stored electrical energy to discharge according to the manufacturer's instructions.
• Confirm the AC input voltage requirements before connecting power.
• If the unit has a manual input-voltage selector, set it correctly before applying power.
• Identify the correct AC input, protective earth, and DC output terminals using the markings on the actual unit.
• Never connect a 5V device to the 24V output.
• Verify the polarity of all DC output connections.
• Secure the power supply using appropriate mounting hardware.
• Maintain sufficient airflow around the vented enclosure.
• Inspect all electrical connections before restoring power.
• Have installation completed by someone qualified to work with electrical control systems.

Safety Note: This power supply contains potentially hazardous mains-voltage circuitry. Internal capacitors may retain an electrical charge after the machine has been disconnected from power. Do not open the enclosure or handle exposed electrical connections without following the appropriate safety procedures.

Incorrect input voltage, wiring, or output connections may damage the power supply, machine controller, sensors, or other connected electronics.