CL-B-80-LB 80W Logic System Power Supply – 110VAC

LASER PARTS | ELECTRICAL & POWER SUPPLIES

CL-B-80-LB 80W Logic System Power Supply – 110VAC

The CL-B-80-LB is an 80W dual-output switching power supply designed to provide regulated DC power to compatible CO2 laser engraving and cutting machine control systems.

Operating from a 110VAC input, this power supply delivers two separate DC outputs: 24VDC at 3A and 5VDC at 1.5A. These voltage outputs can support compatible machine electronics, control circuits, and other low-voltage components.

The vented metal enclosure features screw-terminal connections and a compact design for installation inside compatible laser machine electrical cabinets.

Important: This is the 110VAC input version. A separate 220VAC version is available. Verify the input voltage and output requirements of your original power supply before ordering.

Key Features

• Dual DC Outputs: Provides both 24VDC and 5VDC power from one unit.
• 80W Rated Power: Designed to supply power to compatible low-voltage electrical systems.
• 110VAC Input: Configured for compatible 110V AC electrical systems.
• 24VDC Output: Rated at 3A for compatible machine components.
• 5VDC Output: Rated at 1.5A for compatible electronic control circuits.
• Protective Features: Listed with overcurrent and overvoltage protection.
• LED Indicator: Output indicator for checking power supply status.
• Vented Metal Housing: Perforated enclosure allows airflow around internal components.
• Screw-Terminal Connections: Provides dedicated terminals for AC input, grounding, and DC outputs.
• Replacement Component: Intended for compatible laser machine electrical systems requiring matching specifications.

Product Specifications

Model	CL-B-80-LB
Product Type	Dual-Output Switching Power Supply
Rated Power	80W
Input Voltage	110VAC
Input Frequency	60Hz
Output V1	24VDC @ 3A
Output V2	5VDC @ 1.5A
Output Configuration	Dual DC Outputs
Protection	Overcurrent and Overvoltage (per existing product specifications)
Indicator	LED Output Indicator
Connections	Screw Terminals
Enclosure	Vented Metal Housing
Approximate Dimensions	6.25 × 3.875 × 1.625 inches
Application	Compatible Laser Machine Control Systems
Quantity Included	1 Power Supply
Rabbit Laser USA SKU	118

Understanding the Dual Outputs

The CL-B-80-LB provides two different DC voltages from a single AC power source.

• 24VDC Output: Supplies up to 3A for compatible components requiring 24V power.
• 5VDC Output: Supplies up to 1.5A for compatible electronic devices and control circuits.

These outputs serve different electrical requirements and are not interchangeable. Connecting a component to the wrong voltage output may damage the component or its associated control circuitry.

The 24V and 5V outputs have a combined maximum rated output of approximately 80W. Always verify the requirements of the connected equipment before installation.

Compatibility

This power supply is intended for compatible laser machines and electrical control systems that require a 110VAC input and matching 24VDC and 5VDC outputs.

Before ordering, compare the replacement with your original power supply:

• Model number and manufacturer markings
• 110VAC input voltage and frequency
• 24VDC output rated at 3A
• 5VDC output rated at 1.5A
• Total power requirements
• Terminal labels and wiring arrangement
• Physical dimensions and mounting points
• Available clearance and ventilation inside the electrical cabinet

Important: The 110VAC and 220VAC versions must not be treated as interchangeable simply because they share the CL-B-80-LB model designation. Confirm the actual AC input rating printed on the replacement unit.

This listing is specifically for the 110VAC version, SKU 118. The 220VAC version is listed separately under SKU 119.

Installation & Safety

• Disconnect the laser machine from its electrical supply before inspecting or replacing the power supply.
• Allow internal components to discharge and verify that hazardous voltage is absent before handling electrical connections.
• Confirm that the incoming AC voltage matches the 110VAC rating printed on the unit.
• Follow the terminal labels for AC line, neutral, protective ground, and DC outputs.
• Do not interchange the 24VDC and 5VDC output connections.
• Ensure all electrical connections are correctly secured and insulated.
• Maintain adequate ventilation around the power supply enclosure.
• Verify output voltages and correct operation before reconnecting sensitive electronic components.

Safety Note: This power supply contains exposed electrical terminals and potentially hazardous internal voltages. Installation, inspection, and replacement should be performed by a qualified person familiar with electrical control systems.

A failed power supply may indicate an underlying wiring fault, overloaded circuit, or damaged component. If the replacement fails or behaves abnormally, diagnose the connected electrical system before installing another unit.