CL-B-80-LB 80W Logic System Power Supply – 110/220VAC

LASER PARTS | ELECTRICAL & POWER SUPPLIES

CL-B-80-LB 80W Logic System Power Supply – 110/220VAC

The CL-B-80-LB is an 80W dual-output switching power supply designed for compatible CO2 laser engraving and cutting machine control systems. It provides regulated 24VDC and 5VDC power for electronic components that require different operating voltages.

This model is listed for 110VAC or 220VAC input and delivers two DC outputs: 24VDC at 3A and 5VDC at 1.5A. These outputs are commonly used for low-voltage machine control circuits and compatible electronic components.

Its compact, vented metal enclosure features screw-terminal connections for AC input, protective grounding, and DC output wiring. The design allows installation inside compatible electrical cabinets where space and ventilation are important.

Important: The 110/220VAC marking does not confirm automatic voltage selection. Verify whether the individual power supply requires voltage configuration before connecting power.

Key Features

• Dual DC Outputs: Provides 24VDC and 5VDC from one power supply.
• 80W Rated Power: Supports compatible low-voltage electrical components.
• 110/220VAC Input: Listed for compatible 110V or 220V AC electrical systems, subject to correct input configuration.
• 24VDC Output: Rated at 3A for compatible machine components.
• 5VDC Output: Rated at 1.5A for compatible electronic control circuits.
• Electrical Protection: Listed with overcurrent and overvoltage protection.
• LED Output Indicator: Provides a visual indication of power supply operation.
• Vented Metal Enclosure: Perforated housing allows airflow around internal components.
• Screw-Terminal Connections: Designed for connection to compatible electrical wiring.
• Compact Construction: Suitable for installation inside compatible laser machine electrical cabinets.

Product Specifications

Model	CL-B-80-LB
Product Type	Dual-Output Switching Power Supply
Rated Power	80W
AC Input	110/220VAC
Output V1	24VDC @ 3A
Output V2	5VDC @ 1.5A
Output Configuration	Dual DC Outputs
Protection	Overcurrent and Overvoltage (per existing listing)
Indicator	LED Output Indicator
Terminal Type	Screw Terminals
Enclosure	Vented Metal Housing
Approximate Dimensions	6.25 × 3.875 × 1.625 inches
Application	Compatible Laser Machine Control Systems
Quantity Included	1 Power Supply
Rabbit Laser USA SKU	117

Understanding the Dual Outputs

The CL-B-80-LB provides two separate DC output voltages for compatible machine components.

• 24VDC at 3A: Supplies up to 72W to compatible 24V components.
• 5VDC at 1.5A: Supplies up to 7.5W to compatible 5V electronic circuits.

Together, these outputs provide a combined rated capacity of approximately 80W. Each output has its own current limit, and neither output should be loaded beyond its individual rating.

The two voltage outputs are not interchangeable. Supplying 24V to a component designed for 5V may cause permanent damage to the connected electronics.

Compatibility

This power supply is intended for compatible CO2 laser machines and electrical control systems requiring both 24VDC and 5VDC outputs.

Before ordering, compare the replacement power supply with your original component:

• CL-B-80-LB model number
• AC input voltage and required configuration
• 24VDC output rated at 3A
• 5VDC output rated at 1.5A
• Total output power requirements
• Terminal arrangement and electrical connections
• Physical dimensions and mounting points
• Available ventilation and installation clearance

Important: Although this model is listed for 110/220VAC input, do not assume it automatically adapts to either voltage. Confirm its input-voltage configuration and the requirements of your machine before installation.

Power supplies with similar housings may have different input voltages, output ratings, or wiring arrangements. Matching the enclosure appearance alone does not confirm compatibility.

Installation & Safety

• Turn off and disconnect the laser machine from its electrical supply before replacing the power supply.
• Allow internal capacitors to discharge and verify that hazardous voltage is absent before handling electrical connections.
• Confirm the correct AC input voltage and any required voltage selection or configuration.
• Follow the manufacturer's terminal markings for AC line, neutral, protective ground, and DC outputs.
• Do not interchange the 24VDC and 5VDC output connections.
• Secure all wiring connections and maintain the required electrical insulation.
• Keep ventilation openings clear to prevent excessive heat buildup.
• Have a qualified technician verify the output voltages and operation before reconnecting sensitive electronics.

Safety Note: This power supply contains potentially hazardous electrical voltages and exposed connection terminals. Installation and replacement should be performed by a qualified person familiar with electrical control systems.

If the replacement power supply fails, overheats, or provides incorrect output voltage, disconnect power and investigate the connected circuitry before attempting further operation.