The CW-3000 is a compact, dependable water-circulation system designed to help remove heat from a glass CO₂ laser tube. It continuously pumps coolant through the laser tube and back through an internal radiator, where an 8-inch fan helps release collected heat into the surrounding air.
This closed-loop cooling system is typically recommended for 30W, 40W, and 60W CO₂ laser engraving and cutting machines. By maintaining steady water circulation, the CW-3000 helps protect the laser tube from overheating during normal operation.
Unlike a compressor-based refrigerated chiller, the CW-3000 uses a fan and radiator for heat removal. The coolant temperature will be affected by the temperature of the room, making this unit best suited for climate-controlled workspaces and lower-power CO₂ laser systems.
Key Features
Designed for water-cooled CO₂ laser tubes
Closed-loop water circulation system
Fan-and-radiator heat removal
Large 8-inch cooling fan
Digital coolant temperature display
Built-in water-flow sensor and alarm
Fluid-level gauge for quick inspection
Compact, freestanding design
Convenient carrying handles
Simple operation and maintenance
120V AC power
Recommended Applications
The CW-3000 is typically suitable for:
30W CO₂ laser machines
40W CO₂ laser machines
60W CO₂ laser machines
Laser engraving and cutting systems using water-cooled glass laser tubes
Product Specifications
Model:
CW-3000
Cooling method:
Fan-cooled radiator
Cooling circuit:
Closed fluid loop
Fan size:
8 inches
Electrical requirement:
120V AC
Width:
10.5 inches
Length:
19 inches
Height:
15 inches, including handles
Important Cooling Information
The CW-3000 is a radiator-based cooling system and does not contain a refrigeration compressor. It cannot cool the water below the surrounding room temperature or maintain an exact temperature setting.
For best performance, place the unit in a clean, well-ventilated, climate-controlled area with enough open space around the air inlet and exhaust. Use only the coolant recommended for your laser system and regularly inspect the water level, tubing, and circulation.
Not sure whether the CW-3000 is the correct cooling system for your laser tube? Contact Rabbit Laser USA before ordering, and our team will help verify compatibility with your machine.
