Spare parts can be purchased to repair damaged machine parts. It is better to purchase on a schedule to reduce machine down time for items that are known to have expected life.

Many of these products can be purchased seperately from the laser machine package. Some options are selected by the customer so often that they have become an included item of the standard package of specific laser systems. Check with the sales rep to see if the upgrade is included.. Or purchase these items to upgrade a laser system that you already have.

	PhotoGrav PhotoGrav ... Advanced software for engraving photos.         Retail price is $395. Check for a package deal to have this included with your laser machine purchase.
	Corel X4 Corel X4 ... The top software suite for modifying artwork, converting file types, ... preparing your designs to be ready for laser engraving and cutting .         Retail price is high.. You can pay $349 here. Check for a killer package deal to have this included with your laser machine purchase.
	LaserBuzz products.         Products have individual retail prices. Call our offices to get a package deal or to have sets of this software included with your laser machine purchase.
	Motorized Up/Down platform          All of our laser engraving machines are built with a motorized Z-axis worktable. The moving of the table focuses the laser beam to the top surface of the material. The worktable is powered by an AC motor with sprockets and thick chain.
	Rotary Engraving Attachment          Rotary Attachment - Roller Type: $400     Description: for cylinder object such that the material is rested on the roller. As the rollers turn, the contact friction with the rubber O-rings causes the material to also turn. The material is rotated by contacted surface movement of the rollers. This rotary attachment is best when used on a variety of materials and all of the Items with diameter larger than 1 inch. Applicable materials include wooden dowels, wine bottles, wine glasses..etc. Using the Roller-Style Rotary attachment. .. PDF File
	Rotary Engraving Attachment          Rotary Attachment - Large Chuck Type: $400     Description: for cylinder object such that the material is clamped by the chuck. The material is rotated by degrees of chuck rotation. Applicable materials include wooden dowels, pencils, pens, pipes, rod..etc. Using the Roller-Style Rotary attachment. .. PDF File *** Connecting the Rotary Axis This model is also referred to as the XZ-K-I unit.
	Rotary Engraving Attachment          Rotary Attachment - Mini-Chuck Type: $400     Description: for cylinder object such that the material is clamped by the chuck. The material is rotated by degrees of chuck rotation. Applicable materials include primarily round objects with diameter smaller than 5/8 inches. Examples: wooden dowels, pencils, pens, pipes, rod..etc. Using the Roller-Style Rotary attachment. .. PDF File *** Connecting the Rotary Axis This model is also referred to as the XZ-K-II unit.
	Freon Compressor-Based Chiller CW-5000          Chiller: $700 (CW-5000) ** Temperature Controller, Closed fluid loop, Freon compressor, Dual 8-Inch radiator fans, Fluid level gauge ***     Description: For pumping and cooling the water that flows through the laser tube. Maintains a water temperature less than the set threshold to keep the laser tube cool. This item is typically included in laser systems with higher than 60 watts. Available in 230 and 120 VAC versions. Please specify when ordering. CW-5000 Chiller (120VAC) CW-5000 Chiller (230VAC)
	Red-Dot Pointer          Red Dot pointer: $175     Description: A Red-Dot Pointer would normally be ordered with the machine and installed at the factory. A pointer can be added to any machine by the customer. The pointer is mounted as an addition to the focal assembly. The pointer is non-collinear to the CO2 beam. Our Red-dot pointer kit comes with: laser pointer diode, mounting clamps, screws, adjustable brightness controller, extra wire.
	The Replacement laser tube should be ordered to match the existing laser machine. In order to properly fit the machine, please check the tube length, diameter, and matching laser power supply. Laser tube (40W): $300 (Length=__ mm, Diameter=__ mm)          Expected Life: 2000 hours Laser tube (60W): $400 (Length=__ mm, Diameter=__ mm)          Expected Life: 2000 hours Laser tube (80W): $850 (Length=__ mm, Diameter=__ mm)          Expected Life: 8000 hours Laser tube (150W): $2000 (Length=__ mm, Diameter=__ mm)          Expected Life: 8000 hours
	Laser Power Supply          Laser power supply(40/60W): $400          LPS40/60-120VAC          LPS40/60-220VAC Laser power supply(80W): $500          LPS80-220VAC Laser power supply(120/150W): $875          LPS120/150-220VAC All power supplies use green connectors for plugging in the power and control lines. The actual size and appearance of power supply varies according to wattage. Make sure to specify the appropriate input voltage.
	Axis Stepper Motor Stepper Motor (N23-S1-G): $65      MOONS 23HS2003-25      With Gear/Pulley          25 Teeth - 15mm MXL Belt      NEMA 23, 2.1in Thick Stepper motor (N23-S2-G): $75      MOONS 23HS3002-24      With Gear/Pulley          25 Teeth - 15mm MXL Belt      NEMA 23, 3.0in Thick NEMA Motor Dimensions
	Main Door closed - sensor switch.          Door closed sensor switch: (Long sensor arm)$5.25
	Vacuum - Blower          The vacuum blower is used to remove fumes and vapors from the laser machine and blows it out. It is important to exhaust the fumes such that they do not harm any person in the area. Vacuum Blower: $125 * * * Uses 6 inch inlets and outlets. Also needs two 6 inch hose clamps (can be purchased from local hardware store).
	Air-Assist Compressor          The air assist feature is powered from this industrial diaphram pump. A shop air line should not be used unless it is completely dry and is controlled for air pressure or flow control. Air Assist Air Pump: $65
	High Pressure Air-Assist Compressor          The air assist feature can be powered from this pump. A shop air line should not be used unless it is completely dry and is controlled for air pressure or flow control. This compressor should be paired with an air-spun filter, pressure regulator, control solenoid, Air Assist Air Compressor: $95 Air Filter: $20 Air Regulator: $25 Air Solenoid: $39 Fittings, pipe, flow valve: $25 Air Assist system tutorial
	Honeycomb Worktable:          The standard worktable had been know to be aluminum honeycomb or aluminum slats. We have chosen to use the iron-based honeycomb. The shape is the same as the aluminum, but is much much durable. The iron does not reflect the laser light so much as the aluminum and withstands the laser beam just as well. The iron has the added bonus that magnets can be used to hold down materials that might otherwise blow around, bow or warp, or just use as a quick template. 6040 - Iron Honeycomb - $175 9060 - Iron Honeycomb - $225 1290 - Iron Honeycomb - $295
	Focal-Tube Assembly          The Focal-tube assembly includes the Focal-tube, lens washer, lens nut, standard air nozzle, and air fitting. This does not include lens. The focal tube assembly is nice to have if the machine operator switches between using lenses of different focal length and does not like switching the lenses into the same tube assembly. The lenses can be mounted in two separate assemblies and so can switched in a matter if less than one minute. Focal-Tube Assembly: $55 (Does not include Lens) Post Hardware for mounting mirror at Position #1 - MIRRHW1 Bracket Hardware for mounting mirror at Position #2 - MIRRHW2 Focal Head for mounting mirror at Position #3 - MIRRHW3 Linear Bearing Guide Block $65
	USB Motion Controller System          The motion controller system consists of the Leetro otion Controller, Operator Pad, Interconnect Cable, Software, and Authorization Dongle. USB Motion Control System ... $950 Leetro Operator PAD-03 ... $225 Leetro Controller 6515 ... $575 Interlock cable for PAD-03 to Motion Controller ... $65 Software Dongle for LaserCut Software ... $275
	Flying Optics - Axis Mirror          The axis mirror is mounted at the reflecting point and just prior to each axis. The mirrors sold here are sized for Rabbit laser machines and have the following specifications: Axis Mirror: $35 (Does not include mounting hardware)          25mm Diameter          ~4mm Edge Thickness          Coating: Silver          For 10.6um CO2 Wavelength          Shape: Plano, Non-Polarized Post Hardware for mounting mirror at Position #1 - MIRRHW1 Bracket Hardware for mounting mirror at Position #2 - MIRRHW2 Focal Head for mounting mirror at Position #3 - MIRRHW3
	Focusing Lens 55mm: $100 (CO2LENS-20-55) Focusing Lens 75mm: $100 (CO2LENS-20-75) Focusing Lens 100mm: $110 (CO2LENS-20-100) Specifications for the Lens:          20mm Diameter          1.8mm Edge Thickness          Coating: ZnSe (Zinc Selenium)          For 10.6um CO2 Wavelength          Shape: Plano - Convex

email:Rabbit Laser USA