Shop for the parts you need for installing, upgrading, or repairing your laser machine

Power Supplies

Spare parts can be purchased to repair damaged machine parts. It is better to purchase on a schedule to reduce machine down time for items that are known to have expected life.

	Laser Power Supplies These power supplies are .... . Laser power supply(40/60W): $400 $400 LPS40/60-110VAC $400 LPS40/60-220VAC Laser power supply(80W): $500 $500 LPS80-220VAC Laser power supply(120/150W): $875 $875 LPS120/150-220VAC Specifications for the Power Supplies: All power supplies use green connectors for plugging in the power and control lines. The actual size and appearance of power supply varies according to wattage. Make sure to specify the appropriate input voltage.
	Stepper Motor Power Supply The higher Voltage/Amperage power supply is used to give the stepper motors the power they need to move quickly and repaetably without loosing the commanded steps. Stepper Motor Power Supply: $85 (Part Number PS36-4.2) $85 PS36-4.2 Specifications for the Power Supply: 150W 36V/4.2A Highly Reliable, Universal AC input/full range single output power supply. They have the approval of UL and CE and come 100% full load burn-in tested and are protected with overload/over and voltage/short circuit. Also included is a 2 year manufacturer?s warranty. Dimensions: 7.96 x 3.92 x 1.96" Brand: PowerSupply1 Complies with RoHS Directive AC Input Voltage Range: 85-132/ 170-264VAC Selected by Switch Input Frequency: 47-63Hz Inrush Current: Cold Start, 20A/115V, 40A/230V Input Leakage Current: <0.7mA/230V Line Regulation (Full Load): <ą 0.5% Output Voltage Adj. Range: ą 10% Output Overload Protection: 110-130% Constant Current, Auto Recovery Output Over Voltage Protection: 115-150% Withstand Voltage: I/P-O/P: 3.0KVAC/1min; I/P-F/G: 1.5KVAC/1min; O/P-F/G: 0.5KVAC/1min Rise Time: 50ms@full load (typical) Hold Up Time: 20ms@full load (typical) Operating temp.& humidity: -10°C to 50°C (14°F - 122°F), 20%-93%RH (non-condensing) Storage temp.& humidity: -20°C to 85°C (-4°F - 185°F), 20%-93%RH (non-condensing) MTBF: 100,000 hours UL Ref. Number: E258719 EMC Standards: GB9254, EN55022 classB, EN55024, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11 Cooling Method: Convection
	Logic System Power Supply This dual 5VDC and 24VDC power supply is used to give the motion controller and sensors the required voltages for proper function. Logic System Power Supply: $85 (Part Number DPS-5/24) $85 DPS-5/24 Specifications for the Power Supply: This is a 100 Watt dual output power supply. Full Range Ac Input from 100 to 240VAC. Dual Outputs of +5VDC @ 6Amps & +24VDC @ 3 Amps. Overload (overcurrent) protection Over Voltage Protection LED Output indicator. DIMENSIONS: 7 3/4" length, 4 3/8" wide, 1 11/16" high
	Stepper Motor Driver place a description here..... Stepper Motor Driver: $85 (Part Number STEPCTL......) Specifications for the Stepper Motor Driver: DIMENSIONS:

email:Rabbit Laser USA